40 C.F.R. § 60.373a

Monitoring of emissions and operations.

§ 60.373a Monitoring of emissions and operations.

(a) The owner or operator of any lead acid battery manufacturing facility subject to the provisions of this subpart and controlled by a scrubbing system(s) must install, calibrate, maintain, and operate a monitoring device(s) that measures and records the liquid flow rate and pressure drop across the scrubbing system(s) at least once every 15 minutes. The monitoring device must have an accuracy of ±5 percent over its operating range. The operating liquid flow rate must be maintained within ±10 percent of the average liquid flowrate during the most recent performance test. If a liquid flow rate or pressure drop is observed outside of the normal operational ranges as determined during the most recent performance test, you must record the incident and take immediate corrective actions. You must also record the corrective actions taken. You must submit an excess emissions and monitoring systems performance report and summary report required under § 60.375a(c).

(b) Emissions points controlled by a fabric filter without a secondary filter must meet the requirements of paragraphs (b)(1) and (2) of this section and either paragraph (b)(3) or (4) of this section. New lead acid battery plants with emission points controlled by a fabric filter without a secondary filter must meet the requirements of paragraph (b)(5) of this section. Fabric filters equipped with a high efficiency particulate air (HEPA) filter or other secondary filter must comply with the requirements specified in paragraphs (b)(1) and (6) of this section.

(1) You must perform quarterly inspections and maintenance to ensure proper performance of each fabric filter. This includes inspection of structural and filter integrity.

(2) If it is not possible for you to take the corrective actions specified in paragraph (b)(3)(iii) or (iv) of this section for a process or fabric filter control device, you must keep at least one replacement fabric filter onsite at all times for that process or fabric filter control device. The characteristics of the replacement filters must be the same as the current fabric filters in use or have characteristics that would achieve equal or greater emission reductions.

This document is only available to subscribers. Please log in or purchase access.
Purchase Login

About SCCE

The Society of Corporate Compliance and Ethics (SCCE) is a non-profit, member-based professional association. SCCE supports our members' work with education, news, and discussion forums. We are a community of leaders, defining and shaping the corporate compliance environment across a wide range of industries and geographic regions. In developing and maintaining effective ethics and compliance programs, our members strengthen and protect their companies.

952.933.4977

About HCCA

The Health Care Compliance Association (HCCA), is a 501(c)6 non-profit, member-based professional association. HCCA was established in 1996 and is headquartered in Minneapolis, MN. We provide training, certification, and other resources to over 10,000 members. Our members include compliance officers and staff from a wide range of organizations, including hospitals, research facilities, clinics and technology service providers.

952.988.0141

Facebook Twitter LinkedIn
Copyright © 2024 by Society of Corporate Compliance and Ethics (SCCE) & Health Care Compliance Association (HCCA). No claim to original US Government works. All rights reserved. All information provided through this site, including without limitation all information such as the “look and feel” of the site, data files, graphics, text, photographs, drawings, logos, images, sounds, music, video or audio files on this site, is owned and/or licensed by SCCE & HCCA or its suppliers and is subject to United States and international copyright, trademark and other intellectual property laws. Any third party logos and/or content provided herein is owned by such third parties and is used by permission herein. Your use of this site to is subject to our Terms Of Use and Privacy Statement.
Cookie settings