§ 98.232 GHGs to report.
(a) You must report CO2, CH4, and N2O emissions from each industry segment specified in paragraphs (b) through (j) and (m) of this section, CO2, CH4, and N2O emissions from each flare as specified in paragraphs (b) through (j) of this section, and stationary and portable combustion emissions as applicable as specified in paragraph (k) of this section.
(b) For offshore petroleum and natural gas production, report CO2, CH4, and N2O emissions from equipment leaks, vented emission, and flare emission source types as identified in the data collection and emissions estimation study conducted by BOEMRE in compliance with 30 CFR 250.302 through 304. Offshore platforms do not need to report portable emissions.
(c) For an onshore petroleum and natural gas production facility, report CO2, CH4, and N2O emissions from only the following source types on a single well-pad or associated with a single well-pad:
(1) Natural gas pneumatic device venting.
(2) [Reserved]
(3) Natural gas driven pneumatic pump venting.
(4) Well venting for liquids unloading.
(5) Gas well venting during well completions without hydraulic fracturing.
(6) Well venting during well completions with hydraulic fracturing that have a GOR of 300 scf/STB or greater (oil here refers to hydrocarbon liquids produced of all API gravities).
(7) Gas well venting during well workovers without hydraulic fracturing.
(8) Well venting during well workovers with hydraulic fracturing that have a GOR of 300 scf/STB or greater (oil here refers to hydrocarbon liquids produced of all API gravities).
(9) Flare stack emissions.
(10) Storage tanks vented emissions from produced hydrocarbons.
(11) Reciprocating compressor venting.
(12) Well testing venting and flaring.
(13) Associated gas venting and flaring from produced hydrocarbons.
(14) Dehydrator vents.
(15) [Reserved]
(16) EOR injection pump blowdown.
(17) Acid gas removal vents.
(18) EOR hydrocarbon liquids dissolved CO2.
(19) Centrifugal compressor venting.
(20) [Reserved]
(21) Equipment leaks from valves, connectors, open ended lines, pressure relief valves, pumps, flanges, and other components (such as instruments, loading arms, stuffing boxes, compressor seals, dump lever arms, and breather caps, but does not include components listed in paragraph (c)(11) or (19) of this section, and it does not include thief hatches or other openings on a storage vessel).
(22) You must use the methods in § 98.233(z) and report under this subpart the emissions of CO2, CH4, and N2O from stationary or portable fuel combustion equipment that cannot move on roadways under its own power and drive train, and that is located at an onshore petroleum and natural gas production facility as defined in § 98.238. Stationary or portable equipment are the following equipment, which are integral to the extraction, processing, or movement of oil or natural gas: well drilling and completion equipment, workover equipment, natural gas dehydrators, natural gas compressors, electrical generators, steam boilers, and process heaters.