§ 85.525 Applicable standards.
To qualify for an exemption from the tampering prohibition, vehicles/engines that have been converted to operate on a different fuel must meet emission standards and related requirements as described in this section. The modified vehicle/engine must meet the requirements that applied for the OEM vehicle/engine, or the most stringent OEM vehicle/engine standards in any allowable grouping. Fleet average standards do not apply unless clean alternative fuel conversions are specifically listed as subject to the standards.
(a) If the vehicle/engine was certified with a Family Emission Limit for NOX, NOX+HC, NOX+NMOG, or particulate matter, as noted on the vehicle/engine emission control information label, the modified vehicle/engine may not exceed this Family Emission Limit.
(b) Compliance with greenhouse gas emission standards is demonstrated as follows:
(1) Subject to the following exceptions and special provisions, compliance with light-duty vehicle greenhouse gas emission standards is demonstrated by complying with the N2O and CH4 standards and provisions set forth in 40 CFR 86.1818-12(f)(1) and the in-use CO2 exhaust emission standard set forth in 40 CFR 86.1818-12(d) as determined by the OEM for the subconfiguration that is identical to the fuel conversion emission data vehicle (EDV):
(i) If the OEM complied with the light-duty greenhouse gas standards using the fleet averaging option for N2O and CH4, as allowed under 40 CFR 86.1818-12(f)(2), the calculations of the carbon-related exhaust emissions require the input of grams/mile values for N2O and CH4, and you are not required to demonstrate compliance with the standalone CH4 and N2O standards.