§ 63.459 Alternative standards.
(a) Flint River Mill. The owner or operator of the pulping system using the kraft process at the manufacturing facility, commonly called Weyerhaeuser Company Flint River Operations, at Old Stagecoach Road, Oglethorpe, Georgia, (hereafter the Site) shall comply with all provisions of this subpart, except as specified in paragraphs (a)(1) through (a)(5) of this section.
(1) The owner or operator of the pulping system is not required to control total HAP emissions from equipment systems specified in paragraphs (a)(1)(i) and (a)(1)(ii) if the owner or operator complies with paragraphs (a)(2) through (a)(5) of this section.
(i) The brownstock diffusion washer vent and first stage brownstock diffusion washer filtrate tank vent in the pulp washing system specified in § 63.443(a)(1)(iii).
(ii) The oxygen delignification system specified in § 63.443(a)(1)(v).
(2) The owner or operator of the pulping system shall control total HAP emissions from equipment systems listed in paragraphs (a)(2)(i) through (a)(2)(ix) of this section as specified in § 63.443(c) and (d) of this subpart no later than April 16, 2002.
(i) The weak liquor storage tank;
(ii) The boilout tank;
(iii) The utility tank;
(iv) The fifty percent solids black liquor storage tank;
(v) The south sixty-seven percent solids black liquor storage tank;
(vi) The north sixty-seven percent solids black liquor storage tank;
(vii) The precipitator make down tanks numbers one, two and three;
(viii) The salt cake mix tank; and
(ix) The NaSH storage tank.
(3) The owner and operator of the pulping system shall operate the Isothermal Cooking system at the site while pulp is being produced in the continuous digester at any time after April 16, 2002.
(i) The owner or operator shall monitor the following parameters to demonstrate that isothermal cooking is in operation:
(A) Continuous digester dilution factor; and
(B) The difference between the continuous digester vapor zone temperature and the continuous digester extraction header temperature.
(ii) The isothermal cooking system shall be in operation when the continuous digester dilution factor and the temperature difference between the continuous digester vapor zone temperature and the continuous digester extraction header temperature are maintained as set forth in Table 2:
Table 2 to Subpart S—Isothermal Cooking System Operational Values
Parameter | Instrument number | Limit | Units |
---|---|---|---|
Digester Dilution Factor | K1DILFAC | >0.0 | None |
Difference in Digester Vapor Zone Temperature and Digester | 03TI0311 | <10 | Degrees F. |
Extraction Header Temperature | 03TI0329 |
(iii) The owner or operator shall certify annually the operational status of the isothermal cooking system.
(4) [Reserved]
(5) Definitions. All descriptions and references to equipment and emission unit ID numbers refer to equipment at the Site. All terms used in this paragraph shall have the meaning given them in this part and this paragraph. For the purposes of this paragraph only the following additional definitions apply:
Boilout tank means the tank that provides tank storage capacity for recovery of black liquor spills and evaporator water washes for return to the evaporators (emission unit ID No. U606);
Brownstock diffusion washer means the equipment used to wash pulp from the surge chests to further reduce lignin carryover in the pulp;
Continuous digester means the digester system used to chemically and thermally remove the lignin binding the wood chips to produce individual pulp fibers (emission unit ID No. P300);
Fifty percent solids black liquor storage tank means the tank used to store intermediate black liquor prior to final evaporation in the 1A, 1B, and 1C Concentrators (emission unit ID No. U605);
First stage brownstock diffusion washer means the equipment that receives and stores filtrate from the first stage of washing for return to the pressure diffusion washer;
Isothermal cooking system means the 1995-1996 modernization of brownstock pulping process including conversion of the Kamyr continuous vapor phase digester to an extended delignification unit and changes in the knotting, screening, and oxygen stage systems:
NaSH storage tank means the tank used to store sodium hydrosulfite solution prior to use as make-up to the liquor system